New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors San Francisco pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Windows & Doors in San Francisco, CA | Meridian Windows and Doors San Francisco
We’re Meridian Windows and Doors San Francisco, an independent Mr-Glass service provider working across every San Francisco neighborhood. We repair and replace Mr-Glass windows and doors without factory restrictions clouding the recommendation. What makes our work here different is simple: we know which Mr-Glass components fail first in the Sunset’s salt-laden fog versus a Noe Hill Victorian, and we quote the fix in writing before any screw turns. Call (831) 273-7126 for a free estimate.
Why San Francisco Residents Choose Us for Mr-Glass Service
Mr-Glass windows show up in a lot of San Francisco homes, from Richmond District Edwardians to Mission Revival flats on the east side. Most owners don’t need a sales pitch for a full replacement. They need a technician who can identify a failed IGU seal, a corroded operator, or a worn roller assembly and tell them whether the unit is worth repairing. That’s the conversation we have every day.
Mr-Glass sales & service is a core part of our window and door portfolio, and we carry genuine Mr-Glass replacement hardware whenever the supply chain still makes it available. Elliot Vance, our owner, learned this trade starting at fifteen with a neighbor’s rotted door frame and spent two decades retrofitting California windows before building this crew. His rule applies to every Mr-Glass call we take in San Francisco: measure the actual opening, check the existing balances and trim, and write the real price before the job starts. We don’t swap parts that still work. We don’t push a replacement when a repair holds.
Common Mr-Glass Windows & Doors Problems We Solve in San Francisco
Mr-Glass products are built well, but San Francisco tests them in specific ways. Here are the failures we see most:
- Fogged glass in Mr-Glass casement and picture windows. The Sunset and Richmond sit in cool, damp marine air most of the year. When an insulated glass unit loses its edge seal, moisture gets between the panes and fogs the view. We replace the IGU and reseal the sash without touching the surrounding frame when it’s sound.
- Corroded hardware and crank operators on ocean-facing Mr-Glass windows. Salt-laden fog accelerates pitting on latches, hinges, and casement operators. Homes near Ocean Beach see this worst. We replace the affected hardware with stainless steel or coated components that hold up in the marine layer.
- Warped or binding Mr-Glass vinyl sashes in older Victorians. A 100-year-old wood frame settles unevenly. The vinyl sash doesn’t. We see seal drag and stiff operation where the opening has shifted out of square, and the fix is usually a re-shim and track adjustment rather than a new window.
- Failed roller assemblies in Mr-Glass 6100 horizontal sliders. West-side fog carries fine dust and grit. It works into the track, wears the rollers flat, and the slider starts dragging or jumping off the rail. We clean the track, replace the roller cartridge, and the door moves like it did when it was installed.
- Fogged Mr-Glass 9600 double hungs in Edwardian homes near the Presidio. We pulled a pair on 24th Avenue recently where both sashes had failed. The balances were original Mr-Glass coil springs. We replaced the glass, lubricated the balances, and left the landmark-approved trim untouched. The homeowner got their view of the fog line back without a landmark fight.
Mr-Glass Service in San Francisco: What Local Conditions Mean for Your Equipment
San Francisco’s soft-story retrofit ordinance is the detail that catches most Mr-Glass owners off guard. The ordinance requires existing windows in a permitted retrofit to maintain specific openable area for emergency egress. When we replace a Mr-Glass double hung in a building that’s going through that process, we often have to match the exact operable sash dimensions from the original permit drawings. You can’t just drop in a stock size and call it done. The opening height and width of the operable sash must preserve the egress calculation, or the inspector flags it. That’s why we pull the permit records before we order the unit. A generic replacement window that technically fits the rough opening can fail the final inspection. We measure the sash, not just the frame, and we order the Mr-Glass model or aftermarket equivalent that keeps the egress path legal. This is not a concern in Oakland the same way it is here. San Francisco’s planning department enforces it on any building with soft-story work, and we’ve done enough of these to know which Mr-Glass series match which vintage frame dimensions.
Mr-Glass Models & Products We Service in San Francisco
We service the full Mr-Glass residential line, including the 8600 Series single hung, 9600 Series double hung, 6100 Series horizontal roller, and 7700 Series casement. For each one we follow the same parts rule: genuine Mr-Glass hardware first, especially for balances, weatherstripping, and obscure operators that don’t cross-reference cleanly. If a part is backordered or discontinued, we’ll recommend an aftermarket equivalent only if it won’t compromise fit or structural performance. We keep common Mr-Glass balances, rollers, and hardware in our local stock so most San Francisco calls don’t wait on a factory shipment. Insert Window Replacement in San Francisco is a service we handle regularly for homeowners who want new Mr-Glass glass efficiency without tearing out original Victorian trim.
Mr-Glass Service Pricing in San Francisco
Most Mr-Glass repairs in San Francisco run between $180 and $550 depending on the part and the access. A fogged IGU replacement typically lands around $250 to $400 per sash. Full single-window Window Installation - San Francisco with a Mr-Glass unit usually starts near $700 and runs up to $1,400 installed, with seismic strapping and egress compliance adding cost where required. What drives the price is the part (genuine OEM versus aftermarket), the condition of the surrounding frame, and whether a permit is already open. Your free estimate covers all of it: the tech visit, the measurements, the parts breakdown, and a written line-item price. Call (831) 273-7126 and we’ll come look.
Serving San Francisco, CA - Our Local Coverage Area
We’re based in the San Francisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Windows & Doors in San Francisco
Yes. If the frame is sound and the sash is square, we remove the sash, replace the failed insulated glass unit with new Mr-Glass glass, and reinstall it. There’s no need to replace the full frame unless rot or seismic bracing demands it. Call (831) 273-7126 for a written quote.
Usually the roller assemblies. Richmond fog carries fine grit that settles in the lower track, and over time the roller wheels wear flat and bind. We replace the roller cartridge and clean the track. It usually solves the problem the same visit. Get a free estimate at (831) 273-7126.
Yes, in buildings undergoing a soft-story retrofit. The ordinance requires specific openable sash area for each bedroom and habitable room, and the replacement must match the permit drawings. We pull those drawings and match the sash dimensions before we order. If you’re not sure whether your building files a retrofit, we can check during the estimate.
Usually, yes. We cut the paint line carefully, free the sash, check the balances and weatherstripping, and get them operating again. If the sash itself is rotted or cracked, we’ll quote a replacement sash matched to the opening. The goal is a working window that keeps its original exterior character. Call (831) 273-7126 for a site visit.
They hold up well when the hardware is maintained and the frame is kept painted or sealed. The weak point is exposed metal hardware: salt-laden fog pits latches and crank arms faster than inland air. On ocean-facing elevations we recommend stainless steel hardware upgrades and an annual cleaning cycle. For an exact recommendation on your home, call (831) 273-7126.
Service Areas Near San Francisco
We run Mr-Glass calls throughout San Francisco and the surrounding bay. That includes San Francisco service area work across the Richmond, Sunset, Noe Valley, and Bernal Heights, plus Mr-Glass service in Oakland, Mr-Glass service in Hayward, and calls into Richmond, Alameda, and San Rafael. If your Mr-Glass windows are binding, fogged, or failing at the hardware, we’ll send a technician out.
Book Your Mr-Glass Service in San Francisco Today
We answer the phone with a live person, any hour. Call (831) 273-7126 to schedule your free Mr-Glass estimate in San Francisco. We’ll measure, quote a written price, and get the job done without touching what doesn’t need touching.
Written by Elliot Vance, Owner at Meridian Windows and Doors San Francisco, serving San Francisco since 2009.
Six Reasons Homeowners Choose Meridian Windows and Doors San Francisco
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.