New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors San Francisco pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
PGT Door Installation: The San Francisco Owner’s Guide
We install and replace PGT door hardware, rollers, hinges, and full door units across San Francisco, with most hardware-level installations running $180 – $420 and full door replacements typically $1,900 – $4,600 installed. If your PGT door sticks, drags, or no longer seals against fog-driven moisture, you’re usually looking at a failed roller assembly or a sagged hinge, and we can get you on the schedule fast. The most common phone call we get starts with a sliding door that’s been getting harder to open for six months and finally stops moving at all, usually because the rollers have ground down to the metal carriage.
Which PGT Models This Applies To
PGT builds three product families you’ll see in San Francisco homes: WinGuard (impact-rated, common in coastal and hillside exposures), SpectraGuard, and the standard 7700/9700 series sliding and hinged doors. Roller assemblies and hinge hardware are not universal across these lines. WinGuard doors use a heavier roller carriage rated for the thicker impact glass, so a standard aftermarket roller from a big-box store will bolt in but fail within a year under the weight. The identifying tag you need is on the door’s edge or the top rail, and it lists the series number and glass type. We match parts to that tag, not to what looks close. For most PGT hardware we recommend OEM or PGT-spec equivalents because the tolerances on the strike plates and roller housings are tighter than generic replacements. We stock common WinGuard and 9700-series rollers on the truck, and anything unusual gets ordered same-week from our PGT supply channel. Meridian Windows and Doors San Francisco is an independent service provider, not affiliated with PGT, but we install and replace their products every week and keep their hardware specs current.
Signs Your PGT Door Installation Is Failing
- The door needs two hands to move. Roller bearings are seizing or the wheel surface has flat-spotted. This worsens quickly once the metal carriage starts scraping the track.
- The door drops or scrapes when closing. A hinge or roller housing is worn enough that the slab is no longer level. Left alone, this warps the frame, and a $200 roller job becomes a $2,000 door replacement.
- Visible light or draft at the top or strike edge. The weatherstripping channel or the strike plate is out of alignment, which in San Francisco means fog moisture is getting into the wall cavity during the summer marine layer.
- The latch won’t stay engaged. The strike plate has shifted because the door slab has sagged, or the latch body has worn past its spring tolerance. This is also a security issue: a door that doesn’t latch is a door a burglar tests.
- Condensation or haze between the glass panes. The sealed unit has failed. On PGT doors this means glass replacement, not a hardware fix, and we quote it as a separate line item so you know exactly what you’re paying for.
Replacement Cost & What’s Included
In San Francisco, you should budget $180 – $420 for roller or hinge replacement on a PGT slider, including parts and the service call. Full door replacement, including a new PGT slab, frame, and hardware, typically runs $1,900 – $4,600 depending on the series, glass package, and whether you need impact-rated WinGuard construction. We deliver a written, line-item price before any work starts, and that number does not move at the door. Every PGT installation we do carries our 365-Day Done Right Promise: if the door binds, drifts, or fails within a year, we return and correct it at no charge. That’s in writing, on every job.
DIY or Call Us?
You can safely check the track for debris, clean the sill, and note where the door is binding, but pulling a PGT sliding panel off its track is where DIY goes wrong. A WinGuard panel can weigh over 200 pounds, and when it comes off the rails it wants to go down, fast. Elliot Vance has spent twenty years installing and retrofitting doors across California, and his crew has worked Victorians near Alamo Square enough to know that a 100-year-old frame and a modern double-pane unit rarely agree on the first measurement. Measure twice, order once, the window doesn’t care about your schedule. If you’re not sure what series you have or what failed, call (831) 273-7126 and we’ll walk through it before we ever send a truck.
FAQs
Rollers and hinges on PGT doors in San Francisco typically last 8 – 14 years, but coastal salt air and the daily fog cycle near the bay can cut that to 6 – 9 years. If your hardware is past that range and the door is getting harder to operate, replacement is cheaper than waiting for it to fail completely.
Sometimes. A roller with light surface wear can be cleaned and lubricated, but once the bearing is scored or the wheel has flat spots, no amount of maintenance brings it back. We’ll tell you which one you have, and we won’t sell you a replacement when a cleaning does the job. Call (831) 273-7126 for an honest read on what you’re looking at.
Most roller and hinge replacements on PGT slider doors are done in under two hours on site. Full door replacements typically take one day, with the old door removed, the opening prepped, and the new unit installed, trimmed, and weather-sealed before we do a final walk-through.
We stock common PGT WinGuard and 9700-series rollers, hinge assemblies, and latch hardware on the service trucks, so most hardware calls are same-visit fixes. Less common spec combinations get ordered from our PGT supply channel and arrive within the week. We’ll tell you which category your door falls into when you call.
If your PGT door is dragging, leaking, or not latching, call (831) 273-7126. We’ll identify the part, give you a written price, and stand behind the repair for a full year. Meridian Windows and Doors San Francisco is part of the Garrison Partners family, operating to The Garrison Standard on every PGT installation and repair. We also stock and install parts for CGI, CWS, and ES Windows doors.
Written by Elliot Vance, Owner, Meridian Windows and Doors San Francisco at Meridian Windows and Doors San Francisco, serving San Francisco and nearby areas.
Six Reasons Homeowners Choose Meridian Windows and Doors San Francisco
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.