New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors San Francisco pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Impact Garage Doors: The San Francisco Owner’s Guide
We stock and install Mr-Glass-compatible impact garage doors throughout San Francisco, with most complete door replacements running $2,800 – $5,600 installed depending on size, wind-load rating, and track condition. Most owners figure out something’s wrong the hard way: a door that suddenly binds halfway up, a panel with a hairline crack from road debris, or a track that groans after a winter of salt air off the Bay. The good news is that Mr-Glass parts are specific enough to identify quickly, and we keep the common failure items on the truck.
Which Mr-Glass Models This Applies To
Mr-Glass impact doors in San Francisco fall into two broad families: the residential WindSafe series (single and double car, 8- and 16-foot widths) and the heavier WindGuard commercial line more common on condo garages and parking structures. You’ll identify your model from the sticker on the inside of the left vertical track or the aluminum tag riveted to the top section near the roller bracket. The three things that matter for matching: panel thickness (1-3/8″ versus 2″), the roller stem diameter, and the wind-load rating stamped on the label, typically 130 or 160 mph.
For Mr-Glass specifically, the OEM-vs-aftermarket decision is less about brand loyalty and more about fit. Mr-Glass panels use a slightly deeper shiplap joint than generic hurricane-coast panels, and an aftermarket section that doesn’t seat into that joint will bind. We spec OEM for anything involving the panel-to-panel seam or the bottom weather seal, and we’ll use a quality aftermarket roller or hinge only when the original supplier is backordered. The difference matters on a door rated for impact: a mismatched roller bearing under wind load is exactly where things go sideways.
Signs Your Mr-Glass Impact Garage Doors Is Failing
- Door binds or jerks at the same point every cycle. Almost always a worn roller stem that’s ovaled out the hinge hole, or a panel seam that’s begun to spread. The door is fighting itself; continuing to cycle it accelerates the damage.
- Visible hairline cracks in a panel face. Impact-rated fiberglass and composite panels absorb hits, but a direct strike from a bike handlebar or a truck bumper leaves stress cracks that weaken the laminate. In San Francisco fog, moisture works into those cracks and delaminates the panel from the inside.
- Bottom weather seal has gone flat or torn away. Salt air and temperature swings harden rubber seals fast here. Once the seal fails, water wicks under the door and the next step is rust on the bottom panel stile.
- Top section sags when the door is halfway up. The top strut has lost tension or the hinge tabs are bending. On a WindSafe door that strut is load-bearing, not decorative; when it goes soft the whole panel can rack out of square.
- Persistent rattle during high wind. San Francisco gets sustained 30-plus-mph gusts on the west side. A properly adjusted impact door shouldn’t chatter. Rattle means loose track bolts or worn roller bearings, and it’s the first warning before a roller hops the track.
Replacement Cost & What’s Included
A single replacement panel for a Mr-Glass WindSafe door in San Francisco runs $380 – $650 installed, depending on width and whether it’s a top or middle section. A full door replacement runs $2,800 – $5,600 installed; the spread comes from door size, wind-load rating, track replacement versus track reuse, and whether the opener needs to be re-sprung. Every quote from us is written down before work starts, and that number doesn’t move at the door.
Parts are itemized separately from labor, so you can see exactly what you’re paying for. The labor includes removing the old section or door, haul-away, hardware alignment, and a spring tension check. The work is covered under our 365-Day Done Right Promise in writing: if anything fails within a year, we return at no charge. That includes a free second visit if something isn’t right.
DIY or Call Us?
Some things you can check safely without tools. Confirm the door is on its track, eyeball the rollers for flat spots, and look at the bottom seal for tears. But the minute a Mr-Glass panel needs to come out, or a spring and cable assembly is involved, you’re dealing with stored mechanical energy. Impact doors are heavier than standard doors; a WindSafe 16-footer can weigh 400 pounds. A torsion spring under tension that lets go can break an arm. We say it plainly because we’ve seen it: the DIY savings on a panel swap disappear in one emergency-room visit, and that math never works.
If the door is binding, cracking, or rattling, call us at (831) 273-7126. We’ll send a background-checked, uniformed technician who has worked on Mr-Glass doors in San Francisco long enough to spot the problem in ten minutes, and you’ll get a written price before a single screw comes out.
FAQs
Expect 12 – 18 years from a Mr-Glass impact door in San Francisco, with panels going first if the door faces the ocean side of the hill and gets regular salt-air exposure. Rollers and hinges typically need replacement at the 8 – 10 year mark even when the panels still look good. Call (831) 273-7126 for a condition assessment if your door is past year ten.
No, a cracked impact panel cannot be structurally repaired. The laminate is engineered as a single unit; patching or epoxying a stress crack restores the look but not the wind-load rating. Replacing the section is the honest fix, and we stock common WindSafe panel sizes for quicker San Francisco turnaround. Call (831) 273-7126 with your model number and we’ll check availability.
A single panel swap runs 2 – 3 hours including track alignment and seal replacement. A full door replacement is a one-day job in San Francisco, barring structural surprises in older garage openings. Our written quote schedules the day before we show up, not after. Call (831) 273-7126 and we’ll give you a firm window.
Yes. Our San Francisco trucks carry common Mr-Glass rollers, hinges, bottom seals, struts, and the fasteners specific to WindSafe doors. If the part is a full panel, we order from Mr-Glass distribution and install it the day it arrives. We’re an independent service provider, not affiliated with Mr-Glass; you get the same parts with local accountability. Call (831) 273-7126 for a free estimate and a straight answer on stock.
Written by Elliot Vance, Owner, Meridian Windows and Doors San Francisco, serving San Francisco and nearby areas.
Six Reasons Homeowners Choose Meridian Windows and Doors San Francisco
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.