Mr-Glass Window Replacement Nationwide

Mr-Glass Window Replacement: The San Francisco Owner’s Guide

We stock and install Mr-Glass-compatible replacement windows throughout San Francisco, with most single-unit replacements running $850 – $1,400 installed depending on frame condition and glass package. If your Mr-Glass window has a failed seal, cracked pane, or a sash that no longer locks, we can usually get the replacement ordered and installed within 5 – 7 business days. The way most San Francisco homeowners discover the failure is simple: fog between the panes that won’t wipe away, or a draft that shows up the first foggy week in the Richmond District.

Call (831) 273-7126

Mr-Glass windows are common in mid-2000s through late-2010s condo buildings and single-family remodels across the city. The hardware and glazing beads wear on a predictable schedule, and when they do, the fix is a matched replacement, not a patch job. We carry a range of Mr-Glass-compatible parts on the truck and can source the rest directly through our supplier network as an independent installer.

Which Mr-Glass Models This Applies To

Mr-Glass didn’t run a dozen different series lines, which makes identification simpler than most brands. The units we see most in San Francisco fall into two groups: the aluminum-framed single-hung and horizontal slider units from the brand’s standard residential line, and the vinyl-framed picture window units used in many condo conversions and Sunset District remodels. If you still have the original sticker on the head jamb, the model number starts with “MG” followed by a four-digit code identifying glass width, frame profile, and spacer type.

Here’s the compatibility gotcha that catches people: the Mr-Glass vinyl picture units from before 2012 used a 5/8-inch glazing bead, but the later units switched to a 3/4-inch bead. The glass unit itself is the same thickness on paper, but it won’t seat correctly with the wrong bead profile. We measure the bead channel before ordering, not just the glass. On OEM versus aftermarket, Mr-Glass branded replacement glass runs 15 – 20% higher than equivalent aftermarket insulated units, and for most San Francisco homes with no special warranty remaining, a quality aftermarket insulated unit with the same Low-E and argon spec performs identically. We’ll always quote the honest line item and let you decide.

Signs Your Mr-Glass Window Replacement Is Failing

• Fog or condensation between the panes that won’t wipe off. The spacer seal has failed and the argon gas has leaked out. This is the single most common failure we see in San Francisco, especially in west-side neighborhoods where the marine layer pushes moisture against window glass for months at a time.
• Cold draft coming through a closed sash. The wool pile weatherstrip on Mr-Glass sliding and hung units wears flat after 8 – 12 years, particularly in salt-air corridors near the bay. The frame may be fine, but the seal is gone.
• Sash that sticks, jumps the track, or won’t lock. The nylon guide rollers on Mr-Glass aluminum sliders crack with age, and when one side fails, the sash cocks and binds. This is often repairable with a roller swap and track cleaning.
• Visible cracks in the glass, even hairline ones. San Francisco’s temperature swings are mild, but building settlement and wind load flex the frame. A hairline crack left alone spreads with the next winter storm cycle.
• Hardware that feels loose or spins without engaging. The die-cast lock hardware on Mr-Glass hung windows strips its internal threads over time. The window doesn’t need full replacement, just the hardware assembly and possibly the keeper.

Replacement Cost & What’s Included

For San Francisco addresses, a Mr-Glass-compatible replacement window runs $850 – $1,400 installed for a standard single unit. A simple glass-only replacement in an existing frame lands at the low end, around $450 – $650, while a full frame-and-sash replacement with new hardware and weatherstrip runs to the top of the range or slightly more if the rough opening needs correction. Prices assume a standard opening up to 48 x 60 inches; wider units and second-story access add labor.

Every quote we give is a written number before any work starts. The price includes the replacement unit or glass, all labor, disposal of the old unit, and a written 365-Day Done Right Promise. If the installation fails within that year, we come back at no charge. No change orders at the door, no re-measuring fee, no disposal surprises. Elliot Vance’s rule on estimates is simple: measure twice, order once – the window doesn’t care about your schedule.

DIY or Call Us?

There are two things a homeowner can safely do before calling us: photograph the window label or any engraving in the glass corner so we can identify the unit, and run a hand along the sash perimeter on a windy day to feel for drafts. That tells us half the story before we even arrive. What you shouldn’t do is attempt to remove a failed insulated glass unit yourself. Mr-Glass aluminum frames hold glass under compression with sharp glazing beads, and a slip means a 40-pound glass unit dropping from a raised opening. The risk isn’t worth the saved labor.

If you’re handy and the problem is a stripped lock or a worn roller, we’re happy to sell you the part and let you install it, with the caveat that our guarantee covers parts we buy and install. For glass and full frame replacements, that’s a call to us. We’ll have the right bead profile on the truck and the old unit out without scoring the frame.

Call (831) 273-7126 and we’ll walk you through what we need to see to give you a written number.

FAQs