New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors San Francisco pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Patio Door Installation Across Rodeo
Patio door installation in Rodeo runs $1,850 to $4,600 for most single-door projects, with custom millwork and specialty glass pushing high-end work to $7,500 and beyond. The real driver on Rodeo homes is sizing: houses built between the 1950s and 1970s rarely have standard rough openings, so a “stock” slider almost never fits without reframing or a custom order. That’s why our approach starts with a site measurement, not a catalog. Call (831) 273-7126 for a free estimate, and we’ll give you a written price before anything gets ordered.
Our Patio Door Installation crew knows what waits behind Rodeo’s stucco and wood siding. We measure the existing jamb, check for rot where bay fog has sat against the frame for decades, and spec the door to the actual opening, not the other way around. If you’re along Parker Avenue, View Park Drive, or the hills above Highway 4, we’ve likely already worked a house on your block. The terrain here isn’t flat tract work, and the wind off the Carquinez Strait punishes doors that were never flashed properly.
Why Meridian Windows and Doors San Francisco Is Rodeo’s Preferred Patio Door Installation Company
Meridian Windows and Doors San Francisco is part of the Garrison Partners family and operates to The Garrison Standard on every job in Rodeo. That means the technician who shows up is background-checked and uniformed, the price is on paper before work starts, and the installation is covered in writing for a full year under the 365-Day Done Right Promise. If something fails within that period, we return at no charge. No fine print about labor exclusions.
Homeowners in Rodeo call us because the mid-century framing here demands a contractor who understands non-standard openings. A meridian is a fixed line you measure everything against, and that’s how we run every install. When we replace a slider on a 1960s colonial near San Pablo Avenue, we expect framing that a tract-home crew would miss. We check for header sag, water damage at the sill, and gaps where the original aluminum door was never sealed against wind-driven rain. Those details are why our customers in Rodeo keep our number. Elliot Vance, who leads Meridian, reviews every project scope personally before the crew loads the truck.
Patio Door Repair in Rodeo
Patio Door Repair in Rodeo usually runs $240 to $680, depending on whether the problem is rollers, track alignment, weatherstripping, or a warped panel. Most repairs on Rodeo homes trace back to the same root cause: the original door was never sized or sealed to handle bay wind and fog. A door that’s hard to slide in summer gets worse in winter, when moisture swells the wood frame or corrosion builds up on the original aluminum track.
Track and Roller Service
When a sliding door drags or jumps off its track, the fix usually involves replacing worn rollers and cleaning or straightening the rail. On Rodeo homes with original 1960s doors, we often find the track itself has pitted from decades of salt air off San Pablo Bay. We’ll tell you honestly if a repair will hold, or if the door is past saving and a replacement makes more sense.
Weatherstripping and Seal Work
Fog and wind-driven rain work on door seals constantly in Rodeo. We replace compressed or missing weatherstripping, re-seal the jamb with the right flashing, and test the door under a water spray to confirm it’s tight. A properly sealed patio door cuts drafts immediately, and the fix stays under guarantee for the full 365 days.
Sliding Door Repair in Rodeo
Sliding Door Repair in Rodeo costs $260 to $720 for typical jobs, with the higher end covering bent frames or replacement glass on older units. The sliding doors on Rodeo’s 1950s and 1970s houses were built with thin aluminum and single-pane glass, and after fifty years of Carquinez Strait wind, many of them bow, fog, or bind. Repairing them well means correcting the root cause, not just greasing what’s already failed.
Alignment and Frame Correction
A slider that sticks at one end of the track usually has a frame that’s shifted out of square. On older Rodeo homes, this often comes from foundation settling or a wall that was never perfectly true. We square the frame where possible, re-shim the door, and get it gliding on its track again without forcing it.
Glass Replacement on Sliding Panels
Fogged or cracked glass in a sliding panel is a common call from Rodeo homeowners, especially after a winter storm rolls through the Carquinez Strait. We replace the insulated glass unit and check the frame for moisture damage while the panel is out. If the fog came from a failed seal, a piece of new glass gets the door clear again, and we warranty the work in writing.
Trusted Brands We Service in Rodeo
We’re authorized to install and replace products from PGT, Therma-Tru, Mr-Glass, ViewLux, and four other manufacturer lines, which means we’re not locked into whatever a supplier happens to have on the shelf. For Rodeo homes, we lean on Therma-Tru for impact-rated sliders that hold up to bay wind, and Mr-Glass for custom sizing when a rough opening is half an inch too narrow. We order direct from each manufacturer and keep local common parts in rotation, so Rodeo customers don’t wait on a supply house across the bay.
Common Patio Door Installation Problems We See in Rodeo Homes
- Non-standard rough openings: Rodeo’s 1950s to 1970s framing was done by hand, and openings vary by half an inch or more from one house to the next. A stock door won’t seat correctly, which leaves gaps that bay wind turns into leaks.
- Wind-driven rain at the jamb: Gusts from the Carquinez Strait hit patio doors at an angle, and where the original flashing is missing or deteriorated, water gets driven past the jamb into the subfloor. We see rot under the sill on many older Rodeo doors.
- Fogged or bowed single-pane glass: The original aluminum sliders from this housing era had no thermal break and thin glass. Years of temperature swings between fog and afternoon sun cause the seals to fail and the panels to flex.
- Corroded tracks from salt air: Homes near San Pablo Bay pick up more airborne salt than homeowners expect, and aluminum tracks pit over time. Once the rail is rough, the rollers chew up and the door gets hard to operate.
Pricing for Patio Door Installation in Rodeo, CA
A standard sliding patio door with a basic vinyl or aluminum frame runs $1,850 to $3,200 installed in Rodeo. Add custom sizing for a non-standard rough opening, and the price moves to $3,000 to $4,600. When the job calls for impact-rated glass, laminated interlayers for large-missile rating, or custom millwork around the jamb, budget $5,000 to $7,500 or more. The labor is straightforward; it’s the lead time on specialty glass and the reframing that sets the calendar. You’ll get a written price before we order anything, and it doesn’t move at the door. Call (831) 273-7126 for a free estimate.
One more thing: on architect-driven projects in Rodeo, the custom millwork and specialty finishes aren’t something a crew-led firm orders at the last minute. We place those orders the same week the scope is signed, because a six-week lead item ordered late is what actually stalls a job, not the installer.
We Also Serve Cities Near Rodeo
Our Rodeo customers often ask us to handle doors on rental properties or family homes nearby. We serve Hercules, Pinole, San Pablo, and El Cerrito with the same written pricing and 365-Day Done Right Promise. If your project sits just over the city line, we’ll schedule the same crew and the same standard.
Serving Rodeo, CA - Our Local Coverage Area
We’re based in the Rodeo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Patio Door Installation in Rodeo
Rodeo’s housing stock predates nearby Hercules’s newer subdivisions by a generation, so the rough openings here are rarely built to a stock size. We routinely reframe or custom-order for Rodeo homes of the 1950s through 1970s, which adds a day or two to the install and a few weeks for a custom door order. Hercules’s tract homes are more uniform and can often take an off-the-shelf unit. Call (831) 273-7126 and we’ll tell you what your specific opening will require, based on a measurement, not a guess.
Usually yes, if the millwork is sound. We’re careful around original wood casing and interior trim on Rodeo’s mid-century homes, and we’ll work the new jamb to preserve what’s worth keeping. If rot from bay moisture has gotten into the casing or sill, we’ll show you exactly what needs to come out before we cut. The price for preserving trim versus replacing it is on the written estimate, so there’s no surprise at the end.
Not in every case, but if your door faces the Carquinez Strait or sits on an exposed hillside off Parker Avenue, we recommend it. Impact-rated glass with a laminated interlayer stands up to wind-driven debris during winter gusts, and it also cuts the sound of highway traffic and bay wind. We’ll spec PGT or Therma-Tru impact-rated units when the exposure calls for it, and we’ll show you the difference in writing before you commit.
Usually the track and rollers have worn out, or the frame has shifted out of square over decades on Rodeo’s settling terrain. Salt air near San Pablo Bay also pits aluminum tracks, which makes rollers grind instead of glide. We inspect the track, rollers, and frame alignment on every sliding door repair, and we’ll tell you in plain English whether you need a $300 repair or a full replacement. Estimates are free.
We flash the rough opening correctly before the door goes in, using fluid-applied flashing and proper sill pans, then we seal the jamb and install the door to a true custom fit. On a mid-century rancher off Parker Avenue, we replaced a corroded aluminum slider with a Therma-Tru impact-rated unit after reframing the opening to accept a custom jamb; the old leaks during winter gusts stopped the same day. If your door leaks, call (831) 273-7126 and we’ll find the exact entry point, not just caulk over it.
Written by Elliot Vance, Owner at Meridian Windows and Doors San Francisco, serving Rodeo, CA.
Six Reasons Homeowners Choose Meridian Windows and Doors San Francisco
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.